The exact order number is essential for accurate spare part identification in Siemens automation systems. This guide explains where to find it, how to read it, and what information to include when requesting a quotation. Always verify the number against your installed hardware or system documentation before submitting an inquiry.
Look for a white or silver label on the front or side of the module. The order number (e.g., 6ES7414-3FM07-0AB0) is usually printed below the barcode and starts with '6ES7'. Do not confuse it with serial numbers, firmware versions, or article numbers.
Cross-reference the order number with your system’s hardware configuration list, TIA Portal project, or commissioning report. For bundles like PCS 7 Single AS, confirm the full assembly code (e.g., 6ES7654-7HC00-0XA0) includes the correct CPU variant.
For CPUs and bundles, record additional context: installed firmware version, required memory card, or whether the unit is part of a redundant system. This helps avoid compatibility issues during replacement.
On a CPU 414F-3 PN/DP (6ES7414-3FM07-0AB0), the order number appears clearly on the front panel. The format follows: 6ES7 [series] - [version] - [revision]. Always use the full string—including suffixes like '-0AB0'—as even minor changes can indicate different hardware revisions or certifications.
Order number on front panel label. Include full model (e.g., 6ES7414-3FM07-0AB0) and note if used in safety or redundant setups.
Check the main bundle label (e.g., 6ES7654-7HC00-0XA0). Confirm included CPU type (414-3 vs. 412-5H) and whether power supply or rack is integrated.
Order number on top or side label (e.g., 6ES7288-4RM60-0AA0). Verify interface type (IM60 vs. IM155) and compatible I/O modules.
No. Siemens order numbers are precise identifiers. Even small differences (e.g., -0AB0 vs. -0BA0) may indicate different firmware, certifications, or hardware revisions. Always use the exact number from your installed unit.
Refer to your system’s hardware configuration list, TIA Portal project archive, or maintenance logs. If unavailable, provide photos of the module and its position in the rack when submitting an inquiry.
We provide catalog data matching the order number you supply. Final compatibility must be verified by you against your installed system. We do not claim to be an authorized Siemens distributor or offer warranty coverage.
Only if specifically requested. The order number defines the product type; the serial number identifies a specific unit. For spare part sourcing, the order number is sufficient unless you’re reporting a failure under service contract.
Use the exact order number and include any relevant system context. Our team will review your request based on the catalog data we maintain.